• 3G-SDI, SMPTE-259/292/296/424, 8-bit, 10-bit and 12-bit*
• Single Link 4:2:2 or 4:4:4 (1 x BNC)
• Dual Link HD 4:4:4, (2 x BNC)
• 2K HSDL (High Speed Data Link) 4:4:4, (2 x BNC)
• 4K/UltraHD 4:2:2 and 4:4:4 up to 50/60 fps
• HDMI 2.0 (UHD 50/60p 8-bit 4:2:0)

*Bit-depth support is application-dependent. Check with your software manufacturer for compatibility.

• 3G-SDI, SMPTE-259/292/296/424/425, 8-bit, 10-bit and 12-bit*
• Single Link 4:2:2 or 4:4:4 (1 x BNC)
• Dual Link HD 4:4:4 (2 x BNC)
• 2K HSDL (High Speed Data Link) 4:4:4, (2 x BNC)
• 4K/UltraHD 4:2:2 and 4:4:4 up to 50/60 fps
• 1D LUT Support

*Bit-depth support is application-dependent. Check with your software manufacturer for compatibility.

• Composite/S-Video (Y/C) (1 x BNC/2x BNC+adapter)
• NTSC, NTSCJ, PAL
• Component (3 x BNC)
• HD: YPbPr, RGB
• SD: YPbPr, RGB (component mode)
• SMPTE/EBU N10, Betacam 525 line, Betacam 525J, RGB
• 12-bit D/A, 8x oversampling
• +/- .2 dB to 5.0 MHz Y Frequency Response
• +/- .2 dB to 1 MHz C Frequency Response
• 5% 2T pulse response
• <1% Diff Phase
• <1% Diff Gain
• <1% ns Y/C delay inequity

• Supports graphics with alpha channel over video, matte or framebuffer, or framebuffer content over incoming video or matte.

• 16-channel, 24-bit SDI embedded audio, 48kHz sample rate, Synchronous
• 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (via 4 x BNC on breakout cable)
• 16-channel, 24-bit AES/EBU audio, 48 kHz sample rate, Synchronous (via 8 x BNC on optional K3G-Box)

• 16-channel, 24-bit SDI embedded audio, 48kHz sample rate, Synchronous
• 8-channel, 24-bit HDMI embedded audio, 48kHz sample rate, Synchronous
• 8-channel, 24-bit AES/EBU audio, 48kHz sample rate, Synchronous or Non-synchronous, Internal sample rate conversion (via 4 x BNC on breakout cable)
• 16-channel, 24-bit AES/EBU audio, 48 kHz sample rate, Synchronous (via 8 x BNC on optional K3G-Box)

• Letterbox: This transforms SD anamorphic material to a letterboxed image.
• H Crop: Will produce a horizontally stretched effect on the image; transforms anamorphic SD to full frame
• SD Pillarbox: Will produce an image in the center of the screen with black borders on the left and right sides and an anamorphized image in the center
• V Crop: Will transform SD letterbox material to an anamorphic image.

• LTC timecode input and output (via 1 x BNC each)

• RS-422, Sony 9-pin protocol (via breakout cable or optional K3G-Box)
• 9-pin D-connector pinout is as follows:

  1	GND
  2	RX-
  3	TX+
  4	GND
  5	No Connection
  6	GND
  7	RX+
  8	TX-
  9	GND
  Shell	GND

• Analog Color Black (1V) or Composite Sync (2 or 4V)
• Looping
• 75 ohm on optional K3G-Box, terminated on supplied breakout cable