Sonifex: Confidence Monitor, 2 LED Meters, 2 Analogue & 6 Digital Stereo Inputs
RM-CAD8 Confidence Monitor, 2 LED Meters, 2 Analogue &
6 Digital Stereo Inputs
The latest additions to the Reference Monitor range of 1U rack-mount audio monitors are two new confidence monitors. Using the same outstanding speaker system as the Reference Monitor range, the confidence monitors offer a superb sound with a cut-down feature set. The confidence monitors have been designed to give the best possible performance at a reduced price:
The RM-CAD8 has all the features of the RM-CA2 together with the ability to select from an additional 6 stereo digital inputs. As well as the 2 stereo analogue inputs there are also:
The source select button illuminates to indicate synchronisation lock to the incoming digital source.
Sample rate converters on the digital inputs allow sources of different sample rates to be connected and monitored, between 32kHz and 96kHz.
All other features of the unit are identical to the RM-CA2.
The RM-CA2 is a 1U rack-mount unit offering quality loudspeaker monitoring and 2 channel metering of two stereo analogue audio sources. Input 1 has stereo balanced Neutrik™ XLRs and Input 2 has both stereo balanced Neutrik™ XLRs and stereo unbalanced RCA phono connectors. The balanced analogue inputs can be wired unbalanced if required.
Sources are selected via a front panel push-button switch, with clear LED indication of the current source.
A rear panel DIP switch setting allows the unit to monitor either:
There is a front panel headphone socket which responds to the volume controls
and the headphone socket automatically mutes the internal loudspeakers when a plug is inserted.
A pair of line-level analogue audio outputs follow the selected source at the selected level, or optionally at 10dB lower (if using the unbalanced input), set via rear-panel DIP switch.
The level of the chosen source is shown on an 8 segment LED bar-graph display with PPM and VU scales indicated. The bar-graph can optionally be lowered by 10dB (if using the unbalanced input), set via rear-panel DIP switch.
A single phase meter LED indicates channel correlation or phase error conditions.
The three-way loudspeaker system is fed via a DSP-based active crossover and a trio of highly efficient Class-D amplifiers. Careful attention to driver selection, materials and case design, plus active DSP equalisation, has ensured a flat response and outstanding reproduction from such a shallow unit. A protective limiter prevents damage to the loudspeakers under overload conditions
The RM-CA2 operates from global mains voltages (85-264V AC, 47-63Hz) without adjustment and can optionally be ordered with a DC 9V to 36V input instead of the AC input.
Technical Specification For RM-CAD8
|Audio Inputs||2 x stereo analogue (1 x XLR balanced,
1 x XLR balanced or RCA phono unbal)
4 x stereo XLR balanced AES/EBU digital
1 x stereo RCA phono S/PDIF digital
1 x stereo optical TOSLink digital
|Max level (0dB input gain):||+18dBu (analogue)/0dBFS (digital)|
|Analogue input impedances:||XLR:>20kΩ balanced bridging
|Digital Input Impedances:||110Ω ±20% AES/EBU balanced I/O
75Ω ±5% S/PDIF unbalanced I/O
75Ω ±5% TOSlink unbalanced I/O
|AES/EBU Sample Rate:||32 to 192kHz, converted internally to 48kHz|
|Input Gain:||+10dB on unbalanced input|
|Selection:||Front panel push button with indicator LEDs|
Line Level Outputs
|Audio Outputs:||1 x stereo analogue|
|Gain re Selected Input:||Unity or - 10dB (switchable)|
|Maximum Output Level:||+18dB|
|Distortion:||<0.02% (1kHz, +8dBu output)|
|Noise:||-95dB RMS, unity gain ref
|Frequency Response:||20Hz-20kHz +0/-0.5dB|
|Analogue I/O, ref 0dBu
|Configuration:||Three-way with stereo mid/ high-frequency drivers & mono low-frequency driver|
|Power Output:||2 x 7W (HF) + 15W (LF) with protective limiter|
|Crossover:||250Hz (24dB/octave, Linkwitz-Riley)|
|Distortion (HF Outputs):||< 0.1% (1kHz, 3W output)|
|Distortion (LF Output):||< 0.01% (100Hz, 6W output)|
|Noise:||More than 102dB below full output|
|Volume:||Mute to full volume via front panel rotary control|
|Balance Trim:||±6dB via front panel rotary control|
|Peak Acoustic Level:||98dB SPL @ 2ft|
Level & Phase Metering
|Number:||2 x 8-segment LED bargraphs|
|Line-Up Level:||0dB on scale can be set to 0dB or -10dB via rear panel DIP switch|
|Phase Meter:||Single LED indication showing average|
|Audio Inputs:||4 x XLR 3-pin female analogue
2 x RCA phono analogue
4 x XLR 3-pin female AES/EBU digital
1 x RCA phono female S/PDIF digital
1 x optical TOSLink digital
|Audio Outputs:||2 x XLR 3-pin male (balanced, may be unbalanced)|
|Headphones:||1/4” (6.35mm) A-gauge 3-pole stereo jack socket|
|Mains Input:||Filtered 3-pin IEC male, continuously rated 85 - 264VAC, 47 - 63Hz, fused, 60W peak, 30W average|
|Fuse Rating:||Anti-surge fuse 2A 20 x 5mm|
|RM-CAD8:||Confidence Monitor, 2 LED meters, 2 Analogue & 6 digital stereo inputs|
|RM-CAD8-DC:||Confidence Monitor, 2 LED meters, 2 Analogue & 6 digital stereo inputs, DC supply|
|Dimensions (Raw):||48cm (W) x 27cm (D) x 4.4cm (H) (1U)
19” (W) x 12” (D) x 1.73” (H) (1U)
|Dimensions (Boxed):||57cm (W) x 52cm (D) x15cm (H)
22.4” (W) x 20.5” (D) x 5.9” (H)
|Weight:||Nett: 4.5kg Gross: 6kg
Nett: 10lb Gross: 13.2lb