Your shopping basket is currently empty.
Sierra Video 12x8 RGBHV and Audio Routing switcher (600MHz)
MPN: 1208HB5S
CAT: 06274
Available on Backorder
Ships in 3-5 days
Ships in 3-5 days
£2,700.00 (ex VAT)
£3,240.00 (inc VAT)
Sierra Video: 12x8 RGBHV and Audio Routing switcher (600MHz).
12 x 8 600MHz @ -3dB RGBHV Wideband Video + Stereo Audio Routing Switcher
Alta Pro 12 x 4 routing switchers are housed in a compact 3RU (5.25”) frame with extremely reliable single-board architecture and allows control of RGB/Y Pb Pr, RGBHV and analog HD signals. Alta Pro routing switchers accommodate balanced or unbalanced audio. Its push-button front control panel features an LED bar graph display for VU measurements. Supports TCP/IP protocol and RS-232 serial control.
Alta Pro is also the first Sierra Video product to offer Expand On Demand™ Instant Field Upgrades. Expand On Demand allows your Alta Pro routing switcher to be instantly upgraded from Composite/RGB/Y Pb Pr video to full RGBHV video and to increase inputs and outputs, all without any physical modifications to the frame.
Features:
- 600MHz bandwidth (- 3dB) fully loaded with extremely low crosstalk (< -85 @ 1MHz)
- Energy Savings - Uses 40% less power than previous generation RGBHV and RGB/Y Pb Pr routing switchers
- Expand On Demand™ Instant Field Upgrade to expand from Composite/RGB/Y Pb Pr to RGBHV and/or to a larger Alta Pro configuration simply by calling the factory and purchasing the upgrade
- A/V Breakaway Switch Routing for enhanced performance with projectors and displays
- Room grouping of inputs for flexible configuration in multi-room applications
- Sync Reporting captures and reports the input sync rates for each input signal
- Video Follow Sync™ Switching design eliminates glitches during switching
- Video Mute Capability - switch to “no source” for blank display
- Input Detection - 200mv. Re-shapes and re-squares sync to output correct TTL level
- Balanced or un-balanced stereo on terminal blocks
- Input (level) adjustment (-8dB to +10dB)
- Output (volume) adjustment (Mute, -59.5dB to +15dB)
- Front panel VU meters for setting audio levels and monitoring audio
- Dedicated front panel push-button control interface
- Tri-color LED buttons: 12 input select, 8 output select, and 8 function buttons
- Remote control
- • RS-232/422
- • RS-485 for optional control panels
- • Supports TCP/IP protocol - rear panel RJ-45 connector
- • TyLinx Pro and TyLinx Pro Net Router Control Software
Performance Specification:
Wideband Video
Bandwidth: 600MHz @ -3dB
Video Gain: Unity
Crosstalk: -85dB @ 1MHz, -56dB @ 100MHz, -50dB @ 150MHz
Switching Speed: Deterministic field accurate switching during vertical interval
Input
Video Level: 0.2V to 2.25V p-p with no offset
Impedance: Video - 75 Ohm, Sync – 510 Ohm switchable
Return Loss: < -11dB
Connector Type: BNC
Output
Video Level: 0.2V to 2.25V p-p
Impedance: 75 Ohm
Return Loss: < -10dB
Connector Type: BNC
Analog Stereo Audio
Input Gain Adjust Range: +10dB to full mute
Output Gain Adjust Range: +10dB to full mute
Frequency Response: 20Hz to 20KHz +/- 0.5dB
Dynamic Range: >96 dB (20-20kHz)
Crosstalk: < -89dB @ 1KHz (unity gain)
THD: < 0.025% (20Hz - 20Khz @ +4dBu unity gain)
IM: < 0.025% SMPTE-DIN @ +4dBu unity gain, < 0.01% CCIF @ +14dBu unity gain
Input
Maximum Source Level: +14dBu
Impedance: > 20k Ohm
Connector Type: 5-pin terminal block for balanced or unbalanced operation
Output
Maximum Output Level: +14dBu balanced, +8dBu unbalanced
Impedance: < 50 Ohm
Connector Type: 5-pin terminal block for balanced or unbalanced operation
Control
Serial: General Purpose 9-pin D-sub connector, switchable RS-232 or RS-422, 9600, 38400, 115200 baud
Serial Protocols: SVS host, simple Kramer, and select others
Ethernet: 10/100 Base-T, full duplex, RJ-45 connector
Ethernet Protocols: ARP, ICMP, TCP/IP, Telnet, HTTP
Web Server: For control
Control Panels: Supports full line of SCP programmable, XY & single bus control panels
General
Rack Unit/Frame Size: 3RU
Dimensions: 19”w x 5.25”h x 12.5”d
Mounts in standard 19” rack
Depth measurements do not include front panel hardware or rear cabling
Power Requirement: 100-240 VAC, 50/60Hz (<150 Watts) auto-detectng
Power Usage: ≤ 0.3 amps
Storage Temperature: -40 to +150 degrees F
Operating Temperature: 30 degrees to 100 degrees F ambient
Humidity: 10% to 90 % non-condensing
 | Manual for Alta Pro™ Series 8 and Series 12 Wideband Routing Switchers |
