Lightware: MMX4x2-HDMI Matrix (Cisco Integration Ready)
Avoid Costly CISCO Rooms Configuration Fees
The below configurator wizard will guide you through the steps to generate your own CISCO integration files, which you can download at the end of the process, free of charge
Click Here: Cisco Integration ToolWatch the live demonstration video of Lightware's CISCO integration at InfoComm US:
Lightware: 4x2 HDMI1.4 matrix switcher. All 3D formats, and 4K / UHD ( 30Hz RGB 4:4:4 , 60Hz YCbCr 4:2:0)Key Features
- Cisco VC room integration compatibility
- Advanced control feature pack for 3rd party video conference collaboration
- 1920x1080@120Hz/4:4:4, 4096x2048@30Hz/4:4:4 or 60Hz/4:2:0 maximum resolutions (300MHz)
- Audio embedding and de-embedding
- Adjustable analog audio settings (volume, gain, balance)
- Frame Detector (analyze detailed video timings)
- Compact size
- 5-pole Phoenix balanced analog audio connectors
- Mounting options for rack, furniture or truss
- External universal power adaptor
- Twist-and-lock DC power connector
- HDCP enable/disable function on input
- 4x2 HDMI matrix switcher
- HDMI 1.4, HDCP 1.4 and DVI 1.0 compliant
- Multiple TCP/IP connections
- Advanced EDID Management
- Save and reload full crosspoint configurations as preset
- Intuitive control software for device configuration
- Front panel buttons for crosspoint control
- Device control via Ethernet (TCP/IP), RS-232 and USB
- Supports HDMI 4K signal formats (4K UHD @30Hz RGB 4:4:4 or @60Hz YUV 4:2:0, up to 9 Gbps)
- Command injection on RS-232 and IR ports
- Fully non-blocking switching architecture
- Built-in Event Manager automation feature
- Supports HDMI 3D signal formats (frame packing, side-by-side and top-bottom)
- Pixel Accurate Reclocking
- No video compression
- HDCP 1.4 compliant
- Uncompressed video up to 9 Gbps datarate (300 MHz pixel clock)
- Cross compatible with TPS series Lightware extenders and I/O boards (HDBaseT compatible)
- Firmware upgrade through Ethernet
- Supports all embedded audio formats (including PCM, Dolby Digital and DTS high bitrate audio)
- Built-in video test pattern generator
- No signal latency, zero frame delay
MMX4x2-HDMI is a uniquely mini size matrix switcher. It has four HDMI inputs and two independent HDMI outputs. Audio can be de-embedded from the HDMI signal to a balanced 5-pole Phoenix (Euroblock) port and external audio signal can be embedded into the HDMI stream from another 5-pole Phoenix input port. The volume and gain properties of the audio signal can be modified at both input and output. The unit is fully 4K/UHD/3D capable and HDCP compliant. The device has a built-in Event Manager configurable via the Lightware Device Controller software. Further control options are served by the USB, RS-232, IR (in and out) and Ethernet ports.
Advanced Control Pack Features:
- 100 available event slots in ’Plus’ extenders
- Support RS-232 protocol for communication and control of third party devices like VC codecs. This allows the Cisco Room Kit login on RS-232–USB connection.
- Support to receive CEC commands for control of displays and Lightware Event Manager to automate room actions.
- Support to send CEC commands on HDMI ports for control of other devices.
- Support true Infrared messages using HEX codes to control TVs, media players and other devices with IR emitters.
Connectors | |
Digital Video Inputs | 4x HDMI connector |
Digital Video Outputs | 2x HDMI connector |
Balanced audio input: | 5-pole Phoenix (Euroblock) connector |
Balanced audio output: | 5-pole Phoenix (Euroblock) connector |
Ethernet: | 1 x RJ45 |
USB: | mini-USB-B connector |
IR in and out: | 3.5 mm jack |
Serial port: | 3-pole Phoenix (Euroblock) |
Power: | Locking DC connector (2.1 / 5.5 mm) |
Specification | |
Resolution: | Up to 4K UHD 3840×2160@30Hz,1600x- 1200@60Hz, FullHD 1920x1080@60Hz |
Digital audio formats: | Supports up to 8 channel PCM, Dolby TrueHD and DTS-HD Master Audio 7.1 formats |
EDID emulation: | Yes, Advanced EDID Management |
EDID memory: | 120 factory preset, 12 user programmable |
HDCP compatibility: | Yes |
RS-232 pass-through | Yes, configurable |
RS-232 (control option): | 9600, 19200, 38400, 57600, 115200 Baud Rx,Tx (default: 57600) |
Local power: | DC Power supply 12V, 2A |
Power consumption: | 7W (max) |
Enclosure: | 1 mm metal |
Dimensions: | 221 W x 100.4 D x 26 H mm |
Compliance: | CE |
Warranty: | 3 years |
*Depends on cable category and quality |
Analog Audio Input | |
Volume: | -96 .. 0 dB |
Balance: | -100 .. 0 .. 100 |
Mute function: | Yes |
Analog Audio Output | |
Volume: | -57 .. +3 dB |
Balance: | -100 .. 0 .. 100 |
Mute function: | Yes |