Your shopping basket is currently empty.
Datapath: VisionAV (full and half height bracket inc.)
MPN: VISIONAV/H
CAT: 14190
10-14 Days Lead Time
£1,121.79 (ex VAT)
£1,346.15 (inc VAT)
DATAPATH VisionAV/H DVI/HDMI Capture Card with Audio Card (PCI Express)
The VisionAV/H DVI/HDMI Capture Card with Audio Card from DATAPATH is a four lane PCI Express capture card providing up to 800MB/s bandwidth from the capture engine. The VisionAV/H has up to 256MB buffer memory, enabling triple buffering for all video modes for tear free play back. It can also capture digital video for progressive and interlaced modes up to 4096 x 4096 resolutions to a maximum of 165 MHz pixel clock for DVI and 170 MHz for Analog RGB. The card provides HDMI audio capture and streaming from DVI Channel, as well as balanced and unbalanced analog audio capture. The VisionAV/H comes with an Audio Module card, a half-height bracket, a long ribbon cable, an audio breakout cable, a DVI/VGA adapter, a DVI/Component adapter, and a DVI/HDMI adapter.
The Vision cards provide high performance DMA to system memory or direct to graphics memory with scatter gather, allowing for low latency fast frame rates in all applications. The complete range of Datapath video capture cards are supported by a generic Windows Vision driver and command line interface also supporting DirectShow and RGBEasy SDK. A single Vision device supports up to 16 independent scale factors, color spaces and frame rate clients. The Datapath capture cards have Timestamp support for capture synchronization across inputs, cards and systems. This is for use with edge blending, frame stitching, stereoscopic and many more applications using gen-locked sources.
The VisionAV has two independent video capture channels - one supporting HD capture and a second simultaneously accepting Standard Definition composite video. The VisionAV also adds analog audio capture, which can be perfectly synchronized with either video capture channel. The High Definition signals are input via a DVI-I connector and can support HDMI, DVI, RGB and analog Component (YPbPr) video formats all at resolutions up to 4096 x 4096 pixels and supports 1080p (1920x1080) at 60 frames per second. The Standard Definition channel accepts composite video on a single RCA connector and can auto-detect between PAL, NTSC and SECAM formats up to 720 x 576 at 16 bit color. The VisionAV captures both video channels simultaneously and triple buffers them into on-board storage, alongside an audio stream that can be selected from the HDMI or Analog audio port. This data can then be processed and copied using DMA transfers to the host system for display, storage or streaming.
The VisionAV is a suitable solution for applications that require the capture of analog or DVI sources in real time. Typical applications include capturing analog or DVI sources from PCs, MACs, industrial/medical equipment, cameras and other video equipment streaming video applications and video wall controllers. Adding support for simultaneous analog and digital audio capture makes this a versatile capture card for streaming, webcasting, video conference and many other applications.
In the Box
- DATAPATH VisionAV/H DVI/HDMI Capture Card with Audio Card (PCI Express)
- DATAPATH AM2 Audio Module
- Half Height Bracket (Fitted to Each Board)
- Ribbon Cable (Long)
- Audio Breakout Cable
- DVI / VGA Adapter
- DVI / Component Adapter
- DVI / HDMI Adapter
Specification of the VisionAV Video Capture Card:
| Board Format | PCI Express x4 half size plug-in card, 110mm x 170mm |
| Connectors (main board) | 2 x DVI-I, 1 x RCA (female) |
| HDMI Capture | Supports HDMI 1.3 to 225 MHz (inlcuding deep colour modes) HCDP is supported when used with Datapath graphics cards HDMI audio can be selected as source for audio streaming Incorporates TMDS equaliser to support up to 20m cables |
| DVI Capture | Supports DVI 1.0 RGB 24 bit capture to 165 MHz Incorporates TMDS equaliser to support up to 20m cables |
| VGA/ YPbPr Capture | Triple ADCs sampling up to 170Msps. Full 4:4:4 sampling, 8bits per colour 5-wire, 4-wire or sync-on-green signal format |
| Composite Video Capture | CCIR601 sampling, PAL, NTSC, SECAM formats automatically detected |
| Audio Capture | Stereo Line-In/ Stereo balanced inputs with programmable gain (+/-12dB) 16 bit sampling at 44.1/ 48/ 96 kHz Analogue stereo line-out for direct passthrough of selected input at up to 64kHz sampling, sourced from analogue input or HDMI channel |
| Video Capture Memory | 256MB high bandwidth frame buffer supports triple buffering of HD and SD video Local storage of complex scatter-gather tables for DMA engine (eliminates read overhead) |
| Video Processing | Polyphase FIR scaling engine (7x5) for hardware downscaling and upscaling Colour space conversion allows captured data to be transferred in any format:)
|
| Video Capture Memory | 256MB high bandwidth frame buffer supports triple buffering of HD and SD video Local storage of complex scatter-gather tables for DMA engine (eliminates read overhead) |
| DMA Engine | Direct DMA to physical or virtual memory buffers with full scatter-gather support DMA bandwidth: up to 800 MB/s 16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters |
| Operating System Support | Up to Windows ® 10 and Linux support (NOTE: Check Linux specific features with Sales) |
| Power Requirements | Max current at 12V - 1A Max current at 3.3V - 1A Thermal dissipation - 15.5 W |
| Operating Temperature | 0 to 35 °C/ 32 to 96 °F |
| Storage Temperature | -20 to 70 °C/ -4 to 158 °F |
| Relative Humidity | 5% to 90% non-condensing |
| Warranty | 3 years |
We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.
