| Model Type |
Indoor PTZ mid-high |
| Colour |
Titanium white |
| Camera |
| Image Sensor |
Type 1.0 (1.0 in.) single-plate CMOS sensor |
| Effective Pixels |
approx. 8.29 megapixels (3840 x 2160) |
| Lens |
f=8.3 -124.5 mm, F/2.8 -4.5, 15x optical zoom, 9-bladed iris diaphragm |
| Optical Zoom |
15x optical zoom |
| Digital Zoom |
20x digital zoom |
| Focal Length |
f=8.3 -124.5 mm, F/2.8 -4.5, 35mm equivalent focal length: approx. 25.5 (W) -382.5 mm (T) |
| Angle of View |
Horizontal: 73.0 (W) -5.7°(T) Vertical: 45.2°(W) -3.2°(T) |
| Minimum Subject Illumination |
3840 ×2160: Approx. 1.5 lux (shutter speed 1/30 sec., Frame Rate 29.97P, Gain 33.0 dB) 1920 ×1080: Approx. 3 lux (shutter speed 1/60 sec., Frame Rate 59.94P, Gain 33.0 dB) |
| Shutter Speed |
1/3 -1/2000 sec. (specific values depend on the frame frequency and frame rate) |
| Iris |
Manual/Automatic aperture |
| Gain |
'-6.0 db~33.0 db |
| ND Filter |
Built-in (Off, 1/4, 1/16, 1/64), motor operated |
| White Balance |
AUTO (AWB), Set A, Set B, preset settings (daylight: 5,600 K*, tungsten lamp: 3,200 K*), color temperature setting (2,000 K -15,000 K), Manual |
| Focus |
Focus mode: Manual, AF-boosted MF, Continuous AF, Face AF, Tracking AF type: Dual Pixel CMOS AF, Contrast AF |
| Gamma |
Normal1 (Standard), Normal2 (x4.0), Normal3 (BT.709), Normal4 (x5.0), Wide DR, Canon Log 3 |
| Pan and Tilt |
Pan operation range: Horizontal ±170° Pan operation speed: 0.1°-100°/sec. Tilt operation range: Vertical -30°-+90° Tilt operation speed: 0.1°-100°/sec. |
| Server |
| Video Output Format |
| SDI |
1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit) 1280 x 720: 59.94P, 50.00P (4:2:2 10 bit) -Same video format required for SDI and HDMI (cannot select different formats for SDI and HDMI) -When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI. |
| HDMI |
3840 x 2160: 29.97P, 25.00P, 23.98P (4:2:2 10 bit) 1920 x 1080: 59.94P/59.94i, 50.00P/50.00i/25.00P, 29.97P/23.98P (4:2:2 10 bit)1280 x 720: 59.94P, 50.00P (4:2:2 10 bit) -Same video format required for SDI and HDMI (cannot select different formats for SDI and HDMI) -When 3840 x 2160 is selected for HDMI, video will not be outputted to SDI. |
| IP |
3840 x 2160: 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) 1920 x 1080: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)1280 x 720: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit)640 x 360: 59.94 fps, 29.97 fps, 14.99 fps, 5.00 fps (4:2:0 8 bit) -If 59.94/50.00 Hz is selected for the frame frequency, the 3840 x 2160 format cannot be selected. -A frame rate that exceeds the frame frequency cannot be selected. -JPEG has one pattern fixed depending on the frame frequency (format is fixed and cannot be selected) Resolution: 1280 x 720 When frame frequency is 59.94/50.00 Hz: 14.99 fps, when frame frequency is 23.98Hz: 11.99 fps, when frame frequency is 29.97/25.00 Hz: 12.50 fps. |
| USB |
- |
| Protocol |
XC (Canon's original), RTSP/RTP, NDI|HX*, RTMP/RTMPS, Standard Communication (Serial), Standard Communication (IP) *NDI is a trademark or registered trademark of NewTek, Inc. in the United States and other countries |
| Preset |
Number of presets: Max. 100 (including home position) |
| Interface |
| Communication Control |
LAN, Wi-Fi, Serial, IR |
| Network Terminal |
LAN x 1, RJ45, 1000Base-T |
| 3G-SDI Out Terminal |
BNC jack (output only) x 1, 0.8 Vp-p/75 O, unbalanced SMPTE 424, SMPTE 425, SMPTE ST 299-2 compliant Embedded audio, Time code (VITC/LTC) |
| GEN-LOCK Terminal |
BNC jack x 1, 1.0 Vp-p/75 O, input only |
| HDMI Out Terminal |
HDMI connector x 1, output only |
| RS-422 Terminal |
RJ45 connector x 1 |
| INPUT 1/INPUT 2 Terminals |
XLR/Audio Input (3-pin jack) (pin1: shield, pin2: hot, pin3: cold), 2 sets, balanced Sensitivity (MIC): -60 dBu(Manual volume center, full scale -18 dB)/600 O/Att.: 20 dB Sensitivity (LINE): +4 dBu(Manual volume center, full scale -18 dB)/1 kO or more Supply Voltage: 48 V DC (Bias resistance: 6.8 kO) |
| MIC Terminal |
?3.5 mm stereo mini jack (unbalanced, plug-in power supported) Sensitivity (MIC): -72 dBV(Manual volume center, full scale -18 dB)/1 kO or more/Att.: 20 dB Sensitivity (LINE): -10 dBV(Manual volume center, full scale -18 dB)/1 kO or more Supply Voltage: 2.4 V DC (Bias resistance: 2.2 kO) |
| USB Terminal |
Type-A (USB 2.0) x 1 (future expansion) |
| Others |
| Operating Environment |
Temperature 0°C -+40°C (+32°F -+104°F) Humidity 10% -90% (without condensation) |
| Power Supply |
PoE: PoE+ power supply via LAN connector (IEEE802.3at compliant) -PoE cannot be used External power source: 24 V DC (using included AC adaptor) |
| Power Consumption |
PoE+ Input: Approx. 19.6 W* max. (body only) DC Input: Approx. 18.6 W max. (body only) * Class 4 (25.5 W required) for power supply devices |
| Dimensions (W x H x D) |
Approx. 200 x 269 x 208 mm (7.87 x 10.59 x 8.19 in.) (excluding protrusions) |
| Weight |
Approx. 4.1 kg (9.04 lb.) (body only) |