Your shopping basket is currently empty.
AdderLink XDVI. USB & Single Link DVI KVMA CATx Extender 50 Mtr
MPN: X-DVIPRO
CAT: 05191
Available on Backorder
Ships in 3-5 days
Ships in 3-5 days
£594.00 (ex VAT)
£712.80 (inc VAT)
ADD-X-DVIPRO-IEC - AdderLink XDVI. USB & Single Link DVI KVMA CATx Extender 50 Mtr
Part of the ADDERLink® X-DVI PRO range, the high performance X-DVI PRO digital video and USB extender enables you to locate your critical computing hardware in a secure and temperature controlled environment. Uncompressed digital video and audio is distributed in real-time and with zero latency, allowing the user to maintain an at-the-PC experience. The USB 2.0 interface ensures compatibility with a wide range of USB devices.
- Delivers uncompressed digital video with audio
- USB 2.0 Low and Full speed connection: to interface with a range of devices
- Exact content seen on the local monitor is distributed: up to 50m over a single CATx cable
- Energy efficient design: external power supplies are not needed
Product Features
- Pixel-perfect digital video with real time control: using uncompressed video extension; no visible artefacts or latency are introduced allowing you to be certain of quality and control
- Analog audio Stereo CD quality: Stereo channel 16bit sampled at 44.1kHz to transfer audio from local to remote for line out
- Distribution up to 50m over a single CATx cable: video, USB 2.0 (Low and Full speed) and audio all pass along a single cable, providing up to 50m of extension (distance dependent upon video resolution, CATx cable type, and number of connection intervals)
- Connect any USB interface device: utilising a unique method of USB communication, the ADDERLink X-DVIPRO extenders deliver the highest possible levels of USB compatibility. All USB 1.1 and 2.0 low/full speed devices are supported.
- HDMI video and audio extension capabilities: Digital audio for 8 channels of HDMI audio, supported simultaneously to analog audio
Hardware compatibility
All computers with DVI-D, USB and audio - requirement dependent.
DVI-D Interface – digital only
The system supports resolutions to a maximum of 1920 x 1200 @ 60Hz.
USB 2.0 Low and Full speed
Transparent USB 2.0 (Low and Full speed) that supports HID and mass storage devices to a maximum of 50 meters. You may need to reduce maximum cable length by 5 meters if a USB hub is connected to the receiver unit.
Audio
The system delivers analog stereo audio (Line Out). 8 channels of HDMI audio are supported with sample sizes of 16, 20 or 24 bits at 32kHz, 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, or 192kHz (simultaneously with the jack audio).
Software compatibility
All known operating systems.
Computer connections Transmitter (TX)
DVI-D, audio 3.5mm in, USB type B.
Computer connections Receiver (RX)
DVI-D, audio 3.5mm out, USB type A x 4.
Physical design
Compact case, robust metal construction 120mm / 4.7’’ (w) x 75mm / 3’’(d) x 26mm / 1’’ (h) 320g / 0.7 lb.
Power
Rx: 2.5mm DC jack (power adapter included),100-240VAC 50/60Hz, 0.4A, input to power adapter, 5VDC 12.5W output from power adapter.
Tx: Powered from single USB connection.
Optional 2.5mm DC jack (power adapter not included.
Operating temperature
0 to 40ºC / 32 to 104ºF.
Approvals
CE, FCC.
Important extension distance details
Recommended cables are CAT7 shielded foiled twisted pairs:
Daetwyler 7702 Flexible patch cable
Daetwyler 7120 Bulk cable
Category 5 (or better) shielded twisted pair cable must be used to connect the local and remote units in order to maintain compliance with radio frequency energy emission regulations and ensure a suitably high level of immunity to electromagnetic disturbances.
| Scheme | Resolution | Cable |
Distance |
| WUXGA | 1920x1200 | CAT7 | 50 metres |
| WUXGA | 1920x1200 | CAT6a | 50 metres |
| UXGA | 1600x1200 | CAT5e | 50 metres |
| WUXGA | 1920x1200 | CAT7 | 40 metres |
Note: Distances are achieved using single lengths of trunk/bulk cable. For each break/patch connection, reduce distance by 5m. Preferably patch cables should be of type CAT7a and less than 2m. Patch cables over 2m must be CAT7a. CAT5e is not recommended for use with this system. The maximum extension distance for USB is 50m including connections to and from the X-DVI PRO independent of cable type. If a USB hub is connected to the RX unit, this is seen as 5m of cable length. This needs to be taken into consideration when planning your system.
Additional Accessories
X-RMK-FASCIA: Rack mount plate with screws included
X-RMK-CHASSIS: Rack mount chassis
 | Datasheet |
