Wohler: AMP1A-LP10S 2 Channel, Analog, Audio Monitor, 1RU

Ships in 3-5 days
AMP1A-LP10S
Compact, high quality analog self-powered speaker system - 10 stereo channels (1RU)
The AMP1A Series monitors provide self-powered, full fidelity stereo audio monitoring of 2 analog channels (1 stereo channel) in the smallest rack space possible. These units contain four high performance transducers driven by three power amplifiers: one amplifier/driver combination handles midrange and high frequency information in stereo, while the second handles summed low frequency information below the 500 Hz crossover point.
The unique design provides optimally focused sound for operators in an ultra near field (1 to 3 ft.) working environment and offers performance comparable to that of many separate monitor pairs, yet does so without the installation hassles, awkward speaker placements and "added-on" look. This provides for a higher SPL for the operator while reducing overall ambient sound and adjacent bay crosstalk.
Extended HF response reveals potential problems with audio whine or hiss. Electronic rather than acoustic cancellation of bass frequencies provides positive audible detection of out-of-phase (reversed polarity) audio feeds. A headphone jack is provided on the front panel; usage automatically mutes the speakers.
Wohler Part Number: | 8100-0130 |
Rack Height: | 1RU |
Weight: | 14.0 lbs (6.4 kg) |
Dimensions: | 1.75x19x12" (44.5x483x298 mm) |
Power Consumption: | 35W |
Signals Monitored: | Analog |
Analog Inputs: | 20 Balanced Analog Inputs on Phoenix |
Analog Outputs: | 2 Balanced Analog Outputs from Selected Source on XLR |
Level Meters: | 2 x 10 Segments (Vertical) |
Level Meter Scale: | 23 dB (+3 to -20 dB Factory default for Extended VU) |
Level Meter Threshold: | -6, 0, +4, +8 dBv(='0'), DIP selectable; Factory setting is +4 d |
Level Meter Dynamics: | VU or PPM: DIP selectable; Factory setting is VU |
Level Meter Resolution: | 1 dB |
# of Video Displays: | 0 |
Aural Sound Outputs: | Wohler Speaker System;Headphone, Mutes Speakers |
Acoustic Distortion: | 8% or less at worst case frequencies above 180 Hz including cabinet resonance, typically < 2% |
Electrical Distortion: | <0.15% at any level below limit threshold |
Frequency Response (1/6 octave): | 80 Hz - 16 kHz (+ or -7 dB); (-10 dB @ 50 Hz, 22 kHz) |
Peak Acoustic Output @ 2 feet: | 98 dB SPL |
Hum and Noise: | Better than -68 dB below full output |
Power Output: | RMS Each Side: 10W Transient/5W Continuous; RMS Bass: 20W Transient/10W Continuous |