Your shopping basket is currently empty.
Hall Research: UH-BTX-R HDMI over UTP Extender with HDBaseT (HDBaseT) Receiver
SKU: HAR-UH-BTX-R
Ships in 7-10 days from order
£224.10 (ex VAT)
£268.92 (inc VAT)
- Extend HDMI or DVI over single Cat 5e/6 up to 330 ft (100 m)
- Optional Long Reach mode (BTX Only) to extend 1080p up to 492 ft / 150 m.
- Utilizes HDBaseT™ Class B extension technology
- Can connect to all HDBaseT™ and HDBaseT-Lite™ compliant products
- Full HD support for 1080p deep color, 3D, and 4K UHD
- HDCP Compliant with pass-thru EDID from display back to source
The UH-BT and UH-BTX are a family of HDBaseT™ compliant Senders and Receivers used to extend uncompressed HDMI video and RS-232 control signals up to 230 ft (-BT models) or 328 ft (-BTX models) over a single CAT5e/CAT6 UTP cable.
The extenders are comprised of a Sender (-S) and a Receiver (-R) and extend all PC and HD resolutions without compression, up to 4K UHD.
Full-duplex RS-232 extension is provided via 3-pin terminal blocks, supporting all baud rates up to 115,200 bps.
The UH-BT and UH-BTX Senders and Receivers are compatible with each other; however the maximum distance achievable is dictated by the lower of the two - 230 ft / 70 m.
-
Max Distance:330 ft (100m)
-
Video Standards:DVI (single link), HDMI 1.4 video specs including 4K UHD, 12 bit color depth and 3D video support, HDCP 1.4
-
Connectors:UH-BT(X)-S, (1) HDMI Input, (1) 3-pin RS-232 screw terminal, (1) UTP Output, (1) 2.0 mm Locking DC Power Jack input, UH-BT(X)-R, (1) HDMI Output, (1) 3-pin RS-232 screw terminal, (1) UTP Output, (1) 2.0 mm Locking DC Power Jack input
-
Video Resolutions:DVI signal VGA (640x480) thru WUXGA (1920x1200), HDTV signal 480i through 4K @30 Hz 4:4:4 or 4K @60 Hz 4:2:0 UHD
-
Audio:All HDMI Embedded Audio
-
RS-232:(1) RX, TX and GND on Terminal Strip. Supports all common baud rates including 1200, 2400, 4800, 9600, 19200, 38400, 57600, or 115200
-
DDC:Pass-Thru DDC for reading EDID directly from remotely connected display + HDCP handshake
-
CEC:Pass-Thru Consumer Electronics Control (CEC) for compatible devices
-
Power Supply:100 VAC to 240 VAC, 50-60 Hz, external; 5 VDC, 2.0 A, regulated
-
Temperature:Storage: -40 to 158 °F (-40 to 70 °C), Operating: 32 to 104 °F (0 to 40 °C)
-
Humidity:10% to 90%, non-condensing
-
Typical DC Current Draw:5 VDC, 2.0 A Power Supply, Sender: 2.25 watts max, Receiver: 4.25 watts max
-
Cooling:Convection
-
Enclosure:Metal (Steel ends, Aluminum extrusion)
-
Dimensions:1.18" H x 2.75" W x 3.85" D, 30mm H x 70mm W x 98mm D, (Depth excludes connectors)
-
Weight:Product: 0.75 lb (0.35 kg), Shipping: 1.5 lbs (0.70 kg)
-
Safety:CE
-
EMI/EMC:CE, FCC Class A
-
MTBF:90,000 hours (estimate)
-
Warranty:3 years parts and labor
 | Manual |