Main Dealer |
 |
 |
 |
 |
For Urgent Delivery
Call to arrange same-day courier delivery within the M25 and other South-East locations ... Read More >>GefenPRO: Extender for HDMI ELR with PoL over CAT5
SKU:
GEF-GEF-HDCAT5-ELRPOL
Available to Order
Available to Order
List: £1,160.00
Our Price: £980.20 (ex VAT)
Our Price: £980.20 (ex VAT)
|
Superior Build Quality. |
| Better Compatibility. | |
| More Installation Flexibility. |
Extend HDMI 1080p Full HD with Deep Color up to 330 feet (100 meters) over a single CAT-5 cable, along with 100Base-T Ethernet, RS-232, IR, and remote 5V DC Power
The GefenPRO Extender for HDMI ELR with PoL over CAT5 extends a Hi-Def source with multichannel digital audio at resolutions of up to 1080p Full HD to 330 feet (100 meters) using one CAT-5 cable. Also, it has the capability to power a separate 5V DC device from the Receiver unit, sharing the 5V DC power, transmitted over the CAT-5 cable, up to 2.5 Amps at the Receiver Unit. It supports DVI-D when used with an HDMI to DVI Adapter, providing greater flexibility and options when integrating several home theater components. This product extends Ethernet and provides an IR back channel to control AV sources using the same CAT-5 cable extension. With the built-in IR Blaster, simply point the IR remote(s) at the display to control the Hi-Def sources as if they were located in the same room as the display.How It Works
The GefenPRO Extender for HDMI ELR with PoL over CAT5 Sender unit is located next to a set-top box or DVD player source. Cables supplied with the GefenPRO Extender for HDMI ELR with PoL over CAT5 connect an HDMI source to the Sender unit. The GefenPRO Extender for HDMI ELR with PoL over CAT5 Receiver unit is located next to the display - up to 330 feet (100 meters)away. The HDTV display plugs into the back of the GefenPRO Extender for HDMI ELR with PoL over CAT5 Receiver unit. One CAT-5 cable connects the Sender and the Receiver units to each other. The Ethernet ports on both the Sender and Receiver units are connected to standard network devices such as 100Base-T routers and hubs. Multichannel digital audio is embedded in the HDMI signal (Dolby TrueHD / DTS-HD Master Audio). To power an additional device, order the optional cable below.HDMI Features Supported:
- 1080p Full HD
- Deep Color
- x.v.Color
- 3DTV Pass-Through
- Dolby® TrueHD and DTS-HD Master Audio™
- Lip Sync
Note:
* Power over Link (PoL) is a Gefen proprietary technology that provides 10W of 5 Volt DC power to the Receiver Unit over the single CAT5 signal cable, and allows the Receiver Unit to power additional Gefen devices.
It is based on the Power over Ethernet (PoE) Standards, but is specifically tailored to Gefen's Hi-Def video products.
Package Includes:
- (1) GefenPRO Extender for HDMI ELR with PoL over CAT5 - Sender unit
- (1) GefenPRO Extender for HDMI ELR with PoL over CAT5 - Receiver unit
- (1) 6 ft. HDMI locking cable (M-M)
- (1) AC Power Cord
- (1) Quick-Start Guide
- (1) Rack Ears
Features:
- Extends HDMI at 1080p Full HD and 1920x1200 up to 330 feet (100 meters)
- Extends RS-232 to 330 feet
- Supports high bit-rate audio formats (Dolby TrueHD and DTS-HD Master Audio)
- Supports 3DTV
- Fully HDMI and HDCP compliant
- EDID management for rapid integration of source and display devices
- Built-in IR Blaster allows IR remote control of source devices from remote viewing location
- Internal 110/220VAC Power Supply with detachable IEC cord connector on Sender unit
- 5V DC, 2.5A Locking Power Supply output connector on Receiver unit
- Rack-mountable (with optional Gefen EXT-RACK-1U Rack Shelf)
Specifications:
- Maximum Resolutions Supported: 1080p and 1920 x 1200@60Hz
- HDMI Input Connector (Sender): 19-pin, Type A, female
- HDMI Output Connector (Receiver): 19-pin, Type A, female
- RS-232 Connector (Sender): DB-9, female
- RS-232 Connector (Receiver): DB-9, male
- Ethernet Connectors (1- Sender / 1- Receiver): RJ-45, shielded
- Link Connectors (1- Sender / 1- Receiver): RJ-45, shielded
- IR Blaster connector (1- Sender) : 3.5mm mini mono jack (for Gefen EXT-2IREMIT)
- IR Extender connector (1- Receiver) : 3.5mm mini mono jack (for Gefen EXT-RMT-EXTIR)
- Power Input (Sender): 110/220 VAC Internal Power Supply with IEC Cord Connector
- Power Output Connector (Receiver) : 5V DC locking power supply connector
- Indicator LED (Receiver) : Red power LED (Power is being received over Link when ON)
- Power Supply: AC 110/220V (internal) IEC Connector (Sender Only)
- Dimensions: 8.4" W x 1.7" H x 6.7" D (each unit)
- Shipping Weight: 8 lbs. (preliminary)
 |
Manual |
